Oki IP-6620 - Removing the media

70
Loading the media
Removing the media
Procedure to print the amount of remaining media
The amount of remaining media can be printed on the media before removing the media.

Printing the amount of remaining media before removing it allows you to refer to it to enter the exact amount of
remaining media the next time you install the same media.
1
PRINTER READY
01: PAPER/1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select PRINT
REMAIN MEDIA.
3
MENU
2
PRINT REMAIN MEDIA
Press the OK button.
4
>PRINT REMAIN MEDIA
2
PRINT?
Press the OK button to start the operation.
To cancel the operation, press the CANCEL button.
5
>PRINT REMAIN MEDIA
EXECUTING...
The amount of remaining media is printed.

The amount of remaining media is printed in several locations as shown in the gure below.
01 PAPER / 130.3m 01 PAPER / 130.3m
130.3m
130.3m
130.3m
130.3m
Media
Media advance direction