142
Maintenance
After the operation of the day
The printer has an internal clock which allows it to wash the print heads automatically, ushing some ink through
the print heads, which keeps the print heads in good condition. To ensure the printer’s automatic maintenance
operation, after the operations of the day keep the printer in the conditions below.
1. Keep the printer turned on.
POWER
HEATER MENU
CANCEL
SET
ORIGIN
ONLINE
ADJUST
MAINTENANCE
NOZZLE PRINT PH.RECOVERY
ON
2. Keep the front cover closed.
3. Take up the media on the TUR unit, or remove the media from the printer.
If you keep the media loaded on the printer for a long time, the media may wrinkle on the platen or a
gripping trace may be left on the media. To keep the media in good condition, the operation below is
recommended.
Especially after printing on vinyl media, be sure to remove it from the printer. Note that vinyl media wrinkles
easily.
To Next Page
Loading...
