Oki IP-6620 - Check the USB Connection Status

163
Advanced operations
Check the USB connection status
During printing
The USB connection status cannot be checked during printing.
Check the connection when the printer is not printing.
Not during printing
1
PRINTER READY
01: PAPER / 1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select
INFORMATION, and then press the OK
button.
3
>INFORMATION
2
WARNING INFO
Press the Down button to select USB INFO.
4
>INFORMATION
2
USB INFO
Press the OK button.
5
>>USB INFO
2
ADDRESS:XXX
The panel displays the USB address.
If the address is different from 000, the address is valid.
Note

If the panel displays the USB address as 000, connect the
USB cable connection once again.
6
>>USB INFO
2
ADDRESS :XXX
Press the Down button to select SPEED.
The printer checks the connection speed.
7
>>USB INFO
2
SPEED :XXXXX
The panel displays the USB connection speed.
The panel should display HS.
If the panel displays FS, the print process will be slower.
Before printing Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix