Oki IP-6620 - To turn the printer on and off

38
Before printing
To turn the printer on and o
The power supply must be 200 V.
CAUTION

Do not use any power cable other than the one supplied with the printer.

The supplied power cable is for 200 V AC only. Note that the plug shape diers from that for 100 V AC.
First turn the printer main power switch on, then use the power switch on the operation panel to turn the printer on
or o.
Supply side
Printer power switch Printer power inlet
Power-on procedure
1
Switch off ( O )
Conrm that the printer power switch at the
back of the printer is turned o (O). If on ( I ),
turn it o (O).
Plug one end of the supplied power cable
into the printer power inlet and the opposite
end into a power outlet.
2
Switch on ( | )
Turn on ( I ) the printer power switch at the
back of the printer.