39
Before printing
3
POWER
HEATER MENU
CANCEL
SET
ORIGIN
ONLINE
ADJUST
MAINTENANCE
NOZZLE PRINT PH.RECOVERY
LOAD MEDIA
Power ON/OFF switch
Press the power switch on the operation
panel.
The printer executes a self-diagnostic test and displays the
message to the left on the operation panel.
If an error message appears...
To recover the error, refer to When an error
message is displayed.
If the LEDs on the operation panel do not turn on
after turning on both the power switches at the rear
of the printer and on the operation panel, there is a
problem with the power supply.
CAUTION
Except for emergency, turn o the power while the message PRINTER READY is displayed. If the power is turned o when
the printer is displaying INITIALIZING... or CLEANING, the ink may dribble, the print head may be damaged, or saved
parameters may be lost.
Before printing
Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
