Oki IP-6620 - Print Speed

210
Advanced operations
Print speed
The print speed depends on the print mode and the carriage speed. Print speeds are shown in the table below.
The real print speed may be slower than the indicated values depending on factors such as the media width.
The print speed values are the same with the LCIS model.
Print speeds of the IP-6620 *
1
Print mode
Carriage speed
NORMAL SLOW
DRAFT *
2
66.5 m
2
/h 40.6 m
2
/h
FAST PRODUCTION
49.7 m
2
/h 30.4 m2/h
PRODUCTION
33.1 m
2
/h 20.2 m
2
/h
PRODUCTION / HIGH DENSITY *
2
STANDARD
23.9 m
2
/h 14.2 m
2
/h
STANDARD / HIGH DENSITY *
2
QUALITY
16.0 m
2
/h 9.5 m
2
/h
QUALITY / HIGH DENSITY *
2
HIGH QUALITY
9.2 m
2
/h 5.4 m
2
/h
HIGH QUALITY / HIGH DENSITY
MAX QUALITY
6.0 m
2
/h 3.5 m
2
/h
MAX QUALITY / HIGH DENSITY
*1 The indicated speed values are when printing full width on a media of 1626 mm (64 inches) in width.
*2 Only supported by the CIS model.