Oki IP-6620 - Basic specifications

274
Appendix
Basic specications
Item
Specication / Function
IP-6620
Print method
Piezo-type color inkjet printing
Resolution
(main scanning direction) x (subscanning direction)
360 dpi × 180 dpi × DDP, 360 dpi × 360 dpi × DDP,
540 dpi × 360 dpi × DDP, 540 dpi × 540 dpi × DDP,
720 dpi × 720 dpi, 900 dpi × 900 dpi
Print speed
23.9 m2/h for 64-inch width at 6-pass bidirectional STANDARD mode
Media supply/take-up direction
Rear: Supply side, Front: Take-up side
Media type
Vinyl/Banner/Backlit banner (FF)/Solvent printing coated paper
Media width
Max. 64 inches (1626 mm)
Ink cartridge (CIS)
Normal solvent ink (7 colors)
(black, cyan, magenta, yellow, light cyan, light magenta, gray)
1500 ml for each color
Ink bottle (LCIS)
Normal solvent ink (6 colors)
(black, cyan, magenta, yellow, light cyan, light magenta)
1000 ml for each color
Interface
USB 2.0
Noise
Standby: 50 dB (A) or less
Operating: 60 dB (A) or less (continuous sound)
excluding supply/take-up motor noise and ink lling noise
Caloric power
10368 kJ/H
Guaranteed print area
Area excluding top/bottom margins (5 mm) and right and left margins (5 mm)
(When media edge guards are used, right and left margins are 10 mm.)
Power supply voltage
200 V AC to 240 V AC, 12 A, 50 Hz/60Hz
Input power voltage range
180 V AC to 260 V AC, 50Hz/60 Hz ± 1 Hz
Power consumption
2880 W or less
External dimensions
CIS: 3095 mm (W) × 935 mm (D) × 1247 mm (H) ± 10 mm
LCIS: 3327mm (W) × 935mm (D) × 1247mm (H) ± 10mm
Mass
CIS: 321 kg ± 10 kg
LCIS: 360 kg ± 10 kg
(excluding media and ink)
Print guaranteed temperature/
humidity
20 to 25°C, 40 to 60% RH (no condensation)
Operating temperature/humidity
15 to 30°C, 30 to 70% RH (no condensation)
Storage temperature/humidity
5 to 35°C, 10 to 80% RH (no condensation)
Installation space
(W) x (D) x (H)
CIS: Min. 3900 x 3940 x 2200 mm
LCIS: Min. 4200mm x 3940mm x 2200mm
Maintenance space
(W) x (D) x (H)
CIS: Min. 6100 x 3940 x 2200 mm
LCIS: Min. 6400mm x 3940mm x 2200mm