235
Troubleshooting
When an error message is displayed
When the ERROR LED lights up, check the message displayed on the operation panel.
Error messages shown below are classied into two groups.
Service call errors:
Errors that the operator (customer) cannot recover, such as hardware/software failures. Contact your service
representative.
Operator call errors:
Errors that the operator (customer) can recover.
To recover the error, follow the advice described here.
Service call errors
Restart the printer.
îšš
If a service call error occurs, restart the printer by turning it o and on as follows. Then the error may be recovered.
(1) Turn o the operation panel’s POWER switch and the main printer power switch on the rear of the printer and
the heater power switch.
(2) Remove the power cable front he power outlet, and then remove it from the power inlet at the rear of the
printer.
(3) Hold the Printer for one minute or more.
(4) Connect each power cord above to its inlet, then connect the two cords to the socket.
(5) Turn on all three switches above.
<System error>
SYSTEM ERROR nnnn
RESTART PRINTER
nnnn: Error code
Meaning
An unrecoverable error occurred.
Action
Contact your service representative, and inform them of the displayed
error code.
Before printing Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting
Menu tree Appendix
To Next Page
Loading...
Need help?
General
