79
Loading the media
Procedure to unwind the media from the TUR unit
Follow the procedure below to unwind the media wound on the TUR unit.
1
PRINTER READY
01: PAPER/1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select UNWIND
MEDIA.
3
MENU
2
UNWIND MEDIA
Press the OK button.
4
>UNWIND MEDIA
OK?
Press the OK button.
5
>UNWINDING MEDIA...
The TUR unit starts unwinding the media.
Press the OK button again to stop the unwinding of the
media.
The unwinding also stops if you press the CANCEL
button to exit the UNWIND MEDIA menu.
Set the take-up direction switch to o then to the
desired direction to unwind the media several
times.
6
MENU
2
UNWIND MEDIA
Unwind the media from the
TUR unit
Before printing
Loading the media
Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
