Oki IP-6620 - Page 80

80
Loading the media
About the unwinding direction

The unwinding direction depends on the take-up direction switch setting.
You must set the switch to a dierent position if the media has been taken up in the inner or the outer take-up
direction. Refer to the gure below when setting the switch.
About the duration of the unwinding operation

The unwinding operation stops automatically after a certain length of time. To continue unwinding the media,
return temporarily the take-up direction switch to the o position, and then set it again to the adequate unwinding
direction.
When the media has been
taken-up in the outer direction
Stop
When the media has been
taken-up in the inner direction