Technical Reference Guide – Command descriptions > 102
S
ET
N
/180
INCH
LINE
SPACING
> Code: ESC 3 n
> Compatibility:
ML1190 eco: EPSON LQ/IBM/PPR/IBM AGM
ML1120 eco: EPS FX/IBM III/PPR/IBM AGM
> Function:
Sets line spacing to: n/180 in Epson, n/216 in IBM PPR,
and n/180 in IBM AGM.
> Range:
Range
n = 0 – 255 Number of 1/180 in increments – Epson, IBM
AGM
n = 1 – 255 Number of 1/216 in increments – IBM PPR
> Additional details:
Power-on default or l-Prime signal resets the value set by
this command and sets the value which is determined by
the Menu.
No line feed occurs when n = 0 in Epson, IBM AGM mode.
In IBM PPR mode if n = 0 this command is ignored.
Top of form will not be set.
> (f) Related functions:
LF, VT, or CR (and when Auto LF is on) executes
predetermined LF.
ESC [ \ sets the spacing increment in IBM mode.
S
ET
N
/360
INCH
FINE
LINE
SPACING
> Code: ESC [ n
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
To Next Page
Loading...
