Oki ML1120 - Interface Specifications; IEEE1284 Parallel Interface Specifications; Connectors and Cable

Technical Reference Guide – Interface specifications > 19
I NTERFACE SPECIFICATIONS
IEEE1284 PARALLEL INTERFACE SPECIFICATIONS
C ONNECTORS AND CABLE
Connectors
Printer side:
36-pin receptacle 57-40360-830B (Amphenol or Daiichi
Electronics) or equivalent
Cable side:
36-pin plug 57-30360 (Amphenol or Daiichi Electronics) or
equivalent.
Cable
Use a cable less than 6 ft (1.8 m) in total length.
(A shielded cable is required and use of twisted-pair wires
is recommended for noise prevention.)
The cable is not supplied with the printer.