Oki ML1120 - Horizontal Perforation Rising

Technical Reference Guide – Appendix D – Media specifications > 234
H ORIZONTAL PERFORATION RISING
Horizontal perforation rising on multipart forms is likely to cause
print quality reduction, paper feed instability or paper jamming.
The height of any such rising must be within 1 mm.
MAX.
NO. OF
FORM
PARTS
2 PT 3 PT 4 PT 5 PT
1st part 34–55 kg 34–43 kg 34 kg 34 kg
2nd part 34–70 kg 34–43 kg 34 kg 34 kg
3rd part 34–70 kg 34 kg 34 kg
4th part 34–70 kg 34 kg
5th part 34–70 kg
1 mm or less
1 mm or less
Horizontal perforation
Horizontal perforation