Technical Reference Guide – Command descriptions > 104
L
INE
FEED
> Code: LF
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
This command causes the data in the print buffer to be
printed followed by a movement to the next print line
based on the current line spacing.
> Additional details:
A carriage return will also be executed; in IBM PPR mode
auto CR must be set for CR to be executed.
Line spacing pitch will be set by ESC A n, ESC 0, ESC 2, ESC
3 n, and ESC [ n. Otherwise, the LF pitch will be set by
Menu when power is on or an l-Prime signal is received.
This code will cancel enlarged character mode set by the
ESC SO (Epson mode only) and SO code. If there is no data
before the LF code or only spaces before this code, only
line feed is performed.
S
ET
/
RESET
AUTOMATIC
LINEFEED
> Code: ESC 5 n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
Enables/disables automatic line feed. The printer performs
an automatic LF each time it receives a carriage return
(CR).
> Range:
If n = ODD, SET automatic LF.
If n = EVEN, RESET automatic LF.
To Next Page
Loading...
