Technical Reference Guide – Command descriptions > 105
> Out of range:
The line feed is executed for the current line spacing
setting.
F
INE
LINE
FEED
(
N
/180
INCH
)
> Code: ESC J n
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Immediate line feed is executed without changing the
current line spacing.
n/180 in Epson LQ
n/180 in IBM AGM
n/216 in IBM PPR
> Range:
n = 0 – 255, Number of 1/180 in increments – Epson
n= 1 – 255, Number of 1/180 in (1/216 in) increments –
IBM
> Additional details:
The contents of the buffer are printed without a Carriage
Return. (The printhead does not move to the left margin.)
In IBM mode if auto CR is selected by Menu a carriage
return will be performed.
This command does not need a cancel code, since it is
executed only once.
No feed is performed when n = 0. (Ignored in IBM mode)
> Related functions:
Double width set by SO (or ESC SO in Epson mode) will not
be reset.
ESC [ \ sets the spacing increment for IBM mode.
To Next Page
Loading...
