Technical Reference Guide – Appendix D – Media specifications > 242
NOTE
1. Paper weight is that of 1,000 sheets, each having a unit
area 788 x 1,091 mm, and is expressed in kg.
J
OINING
OF
PARTS
OF
MULTIPART
FORMS
Joining method
> The parts of each multipart form are to be joined by line-
gluing 1 mm wide at the insertion end of the form.
> Glue lines are to be strongly glued and accurately pressed
to prevent float.
> Glue must not overlap the edges of forms.
> Glue areas must be free of significant creases.
Multipart
form
Pressure-
sensitive
paper
34 to 50 kg
(40 - 58
gsm)
Five parts
(original +
four parts)
0.39 mm or
less
Carbon-
backed
paper
TYPE PAPER
QUALITY
WEIGHT
(NOTE 1)
MAXIMUM
NUMBER
OF FORM
PARTS
TOTAL
PAPER
THICKNESS
Glued strongly (width 1mm)
Paper insertion direction
To Next Page
Loading...
