Oki ML1120 - Set Double Strike Print Mode; Reset Double Strike Mode

Technical Reference Guide – Command descriptions > 149
> Related functions:
This command also resets Emphasised mode set by
ESC ! n, in Epson mode.
S ET DOUBLE STRIKE PRINT MODE
> Code: ESC G
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Characters will be printed with each dot double struck.
> Additional details:
Double strike printing can be selected at the same time as
emphasised printing.
This command does not make the printer start to print.
Enhanced print mode is printed in two-pass printing.
> Related functions:
Enhanced printing can also be set by the ESC ! n command,
for Epson mode.
R ESET DOUBLE STRIKE MODE
> Code: ESC H
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Double strike print mode is cancelled on receiving this
command.
> Related functions:
Enhanced mode set by ESC ! n will be reset by ESC H
(Epson mode).