Oki ML1120 - Function Setting

Technical Reference Guide – Operator interface > 70
Set-up menu Print
Registration 1
Adjust the print
starting position
on printing in
the reverse
direction. (The
position moves
to the right or
left in 1/720 in
increments.)
-10 - -1
0
+1 - +10
Print
Registration 2
Adjust the print
starting position
on printing in
the reverse
direction. (The
position moves
to the right or
left in 1/720 in
increments.)
-10 - -1
0
+1 - +10
Print
Registration 3
Adjust the print
starting position
on printing in
the reverse
direction. (The
position moves
to the right or
left in 1/720 in
increments.)
-10 - -1
0
+1 - +10
Print
Registration 4
Adjust the print
starting position
on printing in
the reverse
direction. (The
position moves
to the right or
left in 1/720 in
increments.)
-10 - -1
0
+1 - +10
Operator
panel function
Select full or
limited
operation.
Full operation
Limited operation
Reset inhibit Set whether to
enable or disable
an initial
command.
No
Yes
Print
suppress
effective
Set whether to
enable or disable
a print suppress
setup
Yes
No
MENU ITEM FUNCTION SETTING