Oki ML1120 - Paper Storage Conditions; Usable Paper Types and Assurance Range

Technical Reference Guide – Appendix D – Media specifications > 222
Maintain a parallelism of 0.1 degree or better as standard
between the edges of the paper and pre-printed lines.
P APER STORAGE CONDITIONS
Paper is to be stored under environmental conditions of
temperature 10 – 30°C and humidity 30 – 70%. Also, when there
is a difference in environmental conditions between the storage
area and where the paper is used, allow time for the paper to
reach the environmental conditions of where it is to be used
before using it.
U SABLE PAPER TYPES AND ASSURANCE RANGE
In the following table, “assurance” means that printer
specifications, including print specifications and paper feeding
characteristics, are met. The symbols in the Assurance column
have the following meanings:
A: paper types usable, with assurance
B: paper types conditionally usable, but without assurance.
X: not to be used
PAPER TYPE ASSURANCE CONDITIONS
Continuous paper A See “Continuous paper
(continuous forms)” on
page 223.
Continuous paper with
binding holes
BSee “Binding holes” on
page 235.
Continuous paper with
corner cut
BSee “Corner cuts” on
page 236.
Cut-Sheet paper A See “Cut-sheet paper”
on page 238.
Cut-Sheet paper with
binding holes
BSee “Binding holes” on
page 235.
Cut-Sheet paper with
Perforations
BSee “Perforations” on
page 243.
Envelopes A See “Envelopes
(individual)” on
page 245.