Technical Reference Guide – Command descriptions > 136
03 – 06H
15H
20H – 7FH
80H – AFH
EOH – F3H
F6H – FFH
Other addresses will not be printed in High Speed draft
mode.
See “Appendix B – Print modes/features” on page 210 for
UTL & LQ Print Mode/Features Combination Priority Charts.
F
ONT
DESCRIPTION
S
ELECT
CHARACTER
FONT
> Code: ESC x n
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Selects the print quality mode to be used.
> Range:
Range n = 01H, 31H, 81, B1H selects LQ character font.
Range n = 00H, 30H, 80H, B0H selects Utility character
font.
> Out of range:
This command will be ignored when the value n is not one
of the values above.
> Additional details:
LQ and Utility modes are printed in 10, 12, 15, 17.1, and
20 CPI.
Proportional mode does not work in any mode but LQ.
If Utility, DLL, or Proportional modes are selected the
result will be LQ, proportional printing, based on the
Priority chart.
To Next Page
Loading...
