Oki ML1120 Technical Reference Guide

Technical Reference Guide – Command descriptions > 144
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Upon receipt of this command the printer determines the
amount of space to be added to the right of each character
(specified in dots).
> Range:
Range n = 0 – 255. Bit 7 is ignored.
> Additional details:
n is the number of dots to be added to the right of each
character.
In double width mode, the value of clearance will be
automatically doubled.
Dots width of clearance depends on DPI in each Print
Quality.
S ET ITALIC CHARACTERS
> Code: ESC 4
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Select the alternate character set and print all characters
in Italics mode.
> Additional details:
Italics characters are printed using a slant algorithm.
See priority table for detail command combination.
Italic characters may be overlapped on the next character
cell.
Base of each italics cell is pin no. 24.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \