Oki ML1120 - Select Emulation; Printer Initialisation

Technical Reference Guide – Command descriptions > 174
> Function:
This command disables the paper out detecting function.
> Additional details:
Paper out detector can also be disabled by MENU.
Printer prints up to TOF, then stops print and the Paper End
Signal is active.
S ELECT EMULATION
> Code: ESC { n
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
This command allows the software developer to change the
printer emulation to access the features that match his
requirements.
> Additional details:
This command is not documented for public use.
This command duplicates the MENU selection.
When emulation is changed DLL will be cleared.
P RINTER INITIALISATION
> Code: ESC } NUL
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Upon receipt of this code the printer will be initialised to all
its menu default settings. This command is always active
regardless of the menu “Reset Inhibit”.
> Additional details: