Technical Reference Guide – Command descriptions > 172
ML1120 eco: IBM III
> Function:
Upon receipt of this command the printer is placed in the
active state.
> Additional details:
The printer processes all the data sent to it.
S
TOP
PRINTING
> Code: ESC j
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command places the printer in deselect status.
> Additional details:
To cancel the deselect status, press the SEL switch or load
paper (Menu “Auto Select” set to “Yes”).
Data received before ESC j is printed.
E
NABLE
PAPER
OUT
SENSOR
> Code: ESC 9
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command enables the printer function which detects
whether less than approximately 1 in of paper remains.
Upon detection, the alarm LED is lit and the printer is
deselected.
Manual paper override.
To Next Page
Loading...
