Technical Reference Guide – Command descriptions > 84
C
OMMAND
DESCRIPTIONS
For a summary of the commands available see “Appendix A –
Command summary” on page 195.
H
ORIZONTAL
CONTROL
C
ARRIAGE
RETURN
> Code: CR
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III/ML
> Function:
Terminates the print line and returns the print position to
the start of the line.
The data in the print buffer will be printed.
> Additional details:
Double width mode which is designated by SO (and ESC SO
in Epson mode) will be reset.
Auto feed XT signal low – Epson.
H
ORIZONTAL
TAB
SET
> Code: ESC D n1 n2 ... nj nk NUL
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Sets the tab stops to according to the values of n, which
specify the character tab positions starting from Epson 32
tab) and IBM (28 tab).
> Range:
Epson: k = 1 – 32
To Next Page
Loading...
