Technical Reference Guide – Appendix D – Media specifications > 246
165 mm × 92 mm (6 1/2 in × 3 5/8 in)
225.4 mm × 98.4 mm (8 7/8 in × 3 7/8 in)
241.3 mm × 104.8 mm (9 1/2 in × 4 1/8 in)
L
ABEL
PAPER
The use of label paper is not assured. If any problems occur with
the use of it, equipment or performance is not assured.
When label paper is used in cases of absolute necessity, adequate
prior testing must be performed to check that problems do not
occur. Some precautions for using label paper are given below.
NOTE
Label paper is paper stock that has labels (facestock) placed
on coated single-part continuous form paper used as its
substrate. Label paper must have a low shrinkage difference
between its facestock and substrate, and have labels
distributed evenly over all of the substrate. Also, label paper
must have strong label adhesion and high durability.
> Dimensions
Dimensions conform to those of continuous paper specified
in “Vertical and horizontal dimensions” on page 223. The
size of each label must be 50 mm or more horizontally and
25 mm or more vertically.
> Paper quality
Labels
Paper Quality: High quality paper
Weight: 55 kg
Thickness: 0.1 mm or less
Substrate
Paper Quality: Peel-off paper
Thickness: 0.06 to 0.08 mm
> Adhesive
Adhesive adhesion must be 10 g/in or more in peel
strength. Also, when label paper is wound a half turn
To Next Page
Loading...
