Oki ML1120 Technical Reference Guide

Technical Reference Guide – Specifications > 181
> Dielectric strength
3000 VAC (50/60 Hz)
(No damage will result when the above voltage is applied
between the AC input line and frame for 1 minute.)
E NVIRONMENTAL CONDITIONS
> Ambient temperature and relative humidity
The printer must be packaged during storage.
Avoid condensation at all times.
> Vibration
Operating: 0.3G (5 – 150 Hz) or less (except at resonant
frequency).
Non-operating: 1G (5 – 150 Hz) or less (except at resonant
frequency).
Packing: 1.05G (5 -150 Hz) or less (except at resonant
frequency).
> Impact (Drop)
Packing: 0.914 m (36 in) (one corner, three edges and six
sides)
N OISE
> Measurement method
The printer is placed 2.46 ft (0.75 m) above the floor and
the microphone is set 3.28 ft (1 m) and 4.92 ft (1.5 m)
above the floor (in compliance with ISO 7779).
> Printing operation
CONDITION TEMPERATURE REL. HUMIDITY
Operating 41 – 95°F
(5 – 35 °C)
20 – 80% RH
Storage 14 – 122 °F
(-10 – 50 °C)
5 – 95% RH

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \