Technical Reference Guide – Command descriptions > 139
The previous print mode (print quality and pitch) will be
maintained and restored on resetting proportional spacing.
Proportional spacing can also be designed by ESC ! n, the
master select command. Proportional spacing set by ESC !
n can be reset by ESC p 0.
S
ET
/
RESET
PROPORTIONAL
SPACING
> Code: ESC P n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command sets/resets LQ proportional width
characters.
> Range:
n = ODD, SET proportional spacing.
n = EVEN, RESET proportional spacing.
> Additional details:
Proportional spacing is only available in LQ mode.
LQ Proportional mode has priority over other print qualities
and character pitches.
Upon cancellation of Proportional mode, the printer is set
to the previous pitch in LQ mode.
S
ET
PICA
CHARACTER
PITCH
(10 CPI)
> Code: ESC P
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Change character pitch to 10 CPI.