Technical Reference Guide – Command descriptions > 167
> Additional details:
With this code you can quickly produce any possible
combination of the modes in the following section.
There is no need to reset each mode separately when you
use this code; when you select a new combination the
printer takes care of all resets.
The selectable modes are given in the following section.
P
RINT
MODE
SELECT
> Code: ESC I n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command controls the current print mode according to
the value of n.
> Range:
ML1190 eco
b1 Set Proportional Reset Proportional
b0 Set 12 CPI Set 10 CPI
BIT BR (R = 0 – 7) OF “N”
1 0
N PRINT MODE CPI
0 Utility 10 CPI
2 LQ 10 CPI
3 LQ PROP
8 Utility 12 CPI
10 LQ 12 CPI
To Next Page
Loading...
