Oki ML1120 - Graphics Resolution

Technical Reference Guide – Command descriptions > 164
“m” represents one of the following four graphics modes:
K – Single-density
L – Low speed double-density
Y – High speed double-density
Z – Quadruple-density
n is a decimal value.
> Out of range:
If n does not equal a value specified in the above table,
{ESC ? m n” is ignored and data is not printed as graphics
data.
G RAPHICS RESOLUTION
> Code: ESC [ g n1 n2 m data
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
MODE PINS N HOR. DENS
(DOTS/IN.)
BYTES/
LINE
Single-density 8 0 60 480
Double-density 8 1 120 960
HS Double-density 8 2 120 960
Quadruple-density 8 3 240 1920
CRT I 8 4 80 640
CRT II 8 6 90 720
Single-density 24 32 60 480
Double-density 24 33 120 960
CRT III 24 38 90 720
Triple-density 24 39 180 1440
Hex-density 24 40 360 2880