Oki ML1120 - Print Continuously from All Characters Chart; Print One Character from All Characters Chart; Select Character Seti

Technical Reference Guide – Command descriptions > 128
P RINT CONTINUOUSLY FROM ALL CHARACTERS CHART
> Code: ESC \ n1 n2
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command allows the printing of all codes received
including control codes.
> Range:
n1 and n2 are equal to the total number of characters.
i.e. total count = n1 + (n2*256)
P RINT ONE CHARACTER FROM ALL CHARACTERS CHART
> Code: ESC ^ n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This command will allow the printing of the next character
in the all characters chart.
> Additional details:
Only one character is printed.
This command can be used to print control codes.
S ELECT CHARACTER SET I
> Code: ESC 7
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function: