Oki ML1120 Technical Reference Guide

Technical Reference Guide – Command descriptions > 171
S ET PRINT SUPPRESS
> Code: DC3
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Upon receipt of this command the printer is placed in the
inactive state.
> Additional details:
All data is unavailable after receiving this code.
The SEL/BUSY signal will not be changed by this command.
P RINT SUPPRESS
> Code: ESC Q n
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
This printer mode will not allow the printer to receive any
data except DC1.
> Range:
n = 36
> Additional details:
The printer cannot be reselected by using the Select key.
The SEL LED will flash while in Print Suppress mode.
R ESET PRINT SUPPRESS MODE
> Code: DC1
> Compatibility:
ML1190 eco: IBM

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \