Oki ML1120 Technical Reference Guide

Technical Reference Guide – Command descriptions > 157
NOTE
Enhanced will print as Emphasised.
Double height can be mixed with standard height
characters in the same line. The double height characters
will be printed two times as high from the same base line
as the standard height.
Double height characters are printed unidirectionally in two
passes.
Characters are algorithmically produced.
When Helvetica typestyle is selected with both double
width and double height set, a separate bitmap will be used
for the standard ASCII characters (20H – 7FH).
Underline in double height will be 3 dots high.
G RAPHICS MODE
E NTER / EXIT BIT IMAGE GRAPHICS
> Code: ESC * m n1 n2 <graphics data>
> Compatibility:
ML1190 eco: EPSON LQ/IBM/IBM AGM
ML1120 eco: EPS FX/IBM III/IBM AGM
> Function:
Selects the graphics mode specified by m and prints
graphics data. Not valid in IBM PPR mode.
> Range:
n1 in conjunction with n2 specifies the total number of dot
columns to be printed in graphics.
n1 = 0 – 255, Remainder of dot columns
n2 = 0 – 255, Number of groups of 255 dot columns

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \