Oki ML1120 - Printer Initialisation; Barcode; Print Barcode

Technical Reference Guide – Command descriptions > 175
All data in the buffer will be cleared and the current
printhead position becomes top of page.
DLL data will be deleted (EPSON).
P RINTER INITIALISATION
> Code: FS @
> Compatibility:
ML1190 eco: EPSON LQ
> Function:
Upon receipt of this code the printer will be initialised to all
its menu default settings. Also all data in the buffer will be
cleared and the current printhead position becomes top of
page.
DLL data will not be deleted.
B ARCODE
P RINT BARCODE
> Code: ESC ( B Ln Hn k m S v1 v2 c [DATA]
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Prints barcode data.
> Valid range and meaning of Ln and Hn
0(00H) <= Ln <= 255(FFH)
0(00H) <= Hn <= 255(FFH) MSB is invalid
Indicates number of further parameter bytes.
Number of parameter bytes = Ln + Hn x 256
This parameter will be valid only when set by further
parameter bytes (6 bytes) + number of data (differs
depending on barcode type). For settings other than this,
this command is invalid and the data after the number of