Technical Reference Guide – Command descriptions > 176
bytes designated by this parameter will be received and
discarded.
Sets barcode type by parameter k (MSB valid):
When a barcode type other than above is designated, this
command will be invalid and the number of bytes indicated
by Ln and Hn will be received and discarded.
Sets module (black bar and SP bar) width by parameter m
(MSB valid).
For settings other than above, width is 2 dots.
K (HEX) BARCODE TYPE
00 EAN-13
01 EAN-8
02 Interleaved 2 of 5
03 UPC-A
04 UPC-E
05 Code 39
06 Code 128
07 POSTNET
08 CODABAR(NW7)
09 Industrial 2 of 5
0A Matrix 2 of 5
M MODULE WIDTH
(1/180 IN UNIT)
02 2 dots
03 3 dots
04 4 dots
05 5 dots
To Next Page
Loading...
