Oki ML1120 - General Control; Printer Initialisation; Cancel Code; Set Bit 7 Code to 1

Technical Reference Guide – Command descriptions > 169
G ENERAL CONTROL
P RINTER INITIALISATION
> Code: ESC @
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Upon receipt of this code the printer will be initialised to all
its menu default settings. This command is enabled or
disabled by a Menu selection.
> Additional details:
All data in the buffer will be cleared and the current
printhead position becomes top of page.
DLL data will not be deleted.
C ANCEL CODE
> Code: CAN
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Upon receipt of this command the printer will clear all data
from the print buffer.
> Additional details:
This code does not clear or affect the control codes which
are resident in the buffer.
S ET BIT 7 CODE TO 1
> Code: ESC >
> Compatibility: