Oki ML1120 Technical Reference Guide

Technical Reference Guide – Operator interface > 41
LED FUNCTIONS
ML1120 ECO
LED COLOUR ON OFF BLINKING
SEL Green SELECT
(data
receiving
enable)
state
DESELECT
(data
receiving
impossible)
state
Recovery impossible
alarm state (Note 1).
Keep printing data
state. Power save
mode. (40ms ON/
1.2s OFF). Head
thermal alarm.
(400ms ON/400Ms
OFF). Print suppress
state. (400ms ON/
400Ms OFF)
ALARM Red Paper end
state
Paper
present.
Cut sheet removal
standby state.
Recovery impossible
alarm state (Note 1).
Paper jam state.
Media switching
alarm state.
1 Green See “Change Print Mode” on page 46.
2 Green
SEL ALARM
SEL
LF/FF LOAD/EJECT TEAR
STATUS
FONT
PITCH
SPEED
1
2
NOTE 1
In recovery impossible alarm state, both SEL and ALARM
LEDs are blinking.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \