Oki ML1120 - Reset Italic Characters; Set Italic Character

Technical Reference Guide – Command descriptions > 145
> Related functions:
This mode can also be selected by the ESC ! n command.
R ESET ITALIC CHARACTERS
> Code: ESC 5
> Compatibility:
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
Italics mode is turned off upon receipt of this command.
> Related functions:
This mode can also be reset by the ESC ! n command.
S ET ITALIC CHARACTER
> Code: ESC % G
> Compatibility:
ML1190 eco: IBM
ML1120 eco: IBM III
> Function:
Prints italics characters on receiving this command.
For details of italics characters printed by this command,
see “Appendix B – Print modes/features” on page 210.
> Additional details:
Fifty patterns, (B0)H – (DF)H and (F4)H(F5), structured by
vertical 30 dots and line graphics, cannot be italicised.
R ESET ITALIC CHARACTERS
> Code: ESC % H
> Compatibility:
ML1190 eco: IBM