Oki ML1120 Technical Reference Guide

Technical Reference Guide – Command descriptions > 108
> Function:
Prints data in the print buffer, then performs reverse line
feed. Reverse line feed is also performed when no print
data is stored in the buffer.
Linefeed amounts conform to those which are set using
ESC 0, ESC 1, ESC 2, ESC 3 Pn, ESC A Pn, and ESC % 8
Pn. When not set after the power is turned on, the amount
of line feed equates to a menu-set value.
> Additional Details
Printing and line feed are performed irrespective of AUTO
CR in the menu (a carriage return is not inserted).
One-line horizontal expansion by SO and ESC SO is not
cancelled (also it is not cancelled when AUTO CR is valid).
When the amount of line feed is doubled by setting using
the ESC [ @ command, a single reverse line feed is
performed.
A new line does not start beyond the TOF position.
Page length is controlled.
F ORM FEED
> Code: FF
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Upon receipt of this command the printer prints the data in
the print buffer and carries out a carriage return, then
feeds the paper to the next TOF position.
> Additional details:
Factory setting of form length is eleven (11) in. (Menu).
Pressing the FORM FEED button on the operator panel
always feeds the paper forward to the next top of form
position.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \