Technical Reference Guide – Command descriptions > 85
IBM: k = 1 – 28
Range n = 1 – 255
ML1190 eco
nj < nk: valid.
nj >= nk: nk invalid – IBM, nk ignored and sequence
terminated – Epson.
ML1120 eco
> Out of range:
If k = 0 or k > 32 – Epson, k > 28 – IBM
The last value and any following value of n will be ignored.
Maximum n value in each CPI, values larger than
maximum are ignored.
> Additional details:
The tab settings n1, n2, n3, nk must be entered in
ascending order.
CPI NARROW
10 79
12 95
15 119
17.1 137
20 159
CP1 EPSON VALUE IBM VALUE
10 79 80
12 95 96
15 119 120
17.1 137 137
20 159 160
To Next Page
Loading...
