Technical Reference Guide – Operator interface > 71
Set-up menu Auto LF Set whether to
enable or disable
a print suppress
setup
Yes
No
Auto CR Select whether
to perform auto
CR operation
upon receiving a
carriage return
command. (IBM
PPR and IBM
Yes
No
SI select pitch
(10 CPI)
Set how to
handle an SI
command
received in 10
CPI mode. (IBM
PPR and IBM
AGM emulation
only)
15 CPI
17.1 CPI
SI select Pitch
(12 CPI)
Set how to
handle an SI
command
received in 12
CPI mode. IBM
PPR and IBM
AGM
12 CPI
20 CPI
Time out print Select valid or
invalid.
Valid
Invalid
Auto Select Select whether
to automatically
set Select Mode
after paper
feeding or not.
Yes
No
Host
Interface
Select interface
settings.
Auto Interface
Parallel
USB
Serial
I/F Time Out Select timeout
time for auto
interfacing.
15 sec
30 sec
45 sec
1 min
2 min
3 min
4 min
5 min
MENU ITEM FUNCTION SETTING
To Next Page
Loading...
