Oki ML1120 - Page 69

Technical Reference Guide – Operator interface > 69
Top feed
menu
TOF
Adjustment
(Cut Sheet)
Select an
adjustment
value for the
reference
position in
regard to the
TOF position of
cutpaper/
passbooks. The
position moves
to the rear of
the form by [+]
and to the top of
the form by [-]
in 1/60 in
-30 - -1
0
+1 - +30
TOF (cut
sheet top of
form)
Select the
reference
position for the
TOF position
when feeding
cut-paper in
manual mode.
(Up to the
midsection of
characters in the
first line.)
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm
(13/12 in)
Use top of form
Cut sheet LF
adjustment
Adjust a line
feed amount in
cut-paper mode.
-14 - -1
0
+1 - +14
Set-up menu Graphics Select the
printing
direction when
doubleheight
print data exists
in a line.
Bi-directional
Uni-directional
Receive
buffer size
Select size of
the received
buffer.
1line
32 K
64 K
Paper out
override
Select whether
to detect paper
end or not.
No
Yes
MENU ITEM FUNCTION SETTING