Oki ML1120 Technical Reference Guide

Technical Reference Guide – Specifications > 183
> Character sets
Standard ASCII
Epson Character Set (Italics/Graphics)
IBM Character Set (Set1/Set2)
ML Character Set (Standard/Line Graphics/Block Graphics)
Foreign Character Set (22 types)
Code Page Character Set (42 types)
> Selectable character pitches
5 CPI: 0.2 in (5.08 mm)
6 CPI: 0.167 in (4.23 mm)
7.5 CPI: 0.133 in (3.39 mm)
8.5 CPI: 0.117 in (2.96 mm)
10 CPI: 0.1 in (2.54 mm)
12 CPI: 0.083 in (2.12 mm)
15 CPI: 0.067 in (1.69 mm)
17.1 CPI: 0.058 in (1.48 mm)
20 CPI: 0.05 in (1.27 mm)
> Maximum number of dot columns per line in graphics:
Graphics
Text
CHARACTER
PITCH (
UTILITY
MODE
NLQ MODE HSD
MODE
SSD
20 1,920 3,840 1,440 -
SINGLE
DENSITY
DOUBLE
DENSITY
QUADRUPLE
DENSITY
480 960 1,920
CHARACTER
PITCH (CPI)
UTILITY
MODE
NLQ
MODE
HSD
MODE
SSD
10 960 1,920 720 -
12 1,152 2,304 864 768
15 1,440 2,880 1,080 -
17.1 1,646 3,292 1,234 -

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \