Oki ML1120 - Page 190

Technical Reference Guide – Specifications > 190
> Character sets
Standard ASCII
Epson Character Set (Italics/Graphics)
Foreign Character Substitution (15 types)
Bar Code
> Selectable character pitches
5 CPI: 0.2 in (5.08 mm)
6 CPI: 0.167 in (4.23 mm)
7.5 CPI: 0.133 in (3.39 mm)
8.5 CPI: 0.117 in (2.96 mm)
10 CPI: 0.1 in (2.54 mm)
12 CPI: 0.083 in (2.12 mm)
15 CPI: 0.067 in (1.69 mm)
17.1 CPI: 0.058 in (1.48 mm)
20 CPI: 0.05 in (1.27 mm)
> Maximum number of dot columns per line in graphics:
Graphics
ANK Text
20 CPI - 166 CPS 500 CPS
SINGLE
DENSITY
DOUBLE
DENSITY
QUADRUPLE
DENSITY
60 DPI 480 960 1,920
80 DPI 640 - -
90 DPI 720 1,440 2,880
CHARACTER
PITCH (CPI)
UTILITY
MODE
LQ MODE HSD
MODE
10 960 2,880 720
12 960 2,880 -
15 960 2,880 -
CHARACTER
PITCH
HSD LQ UTILITY