Oki ML1120 - Page 55

Technical Reference Guide – Operator interface > 55
Rear feed
menu
TOF
adjustment
(continuous)
Select an adjustment
value for the
reference position in
regard to the TOF
position of a
continuous form.
The position moves to
the rear of the form
by [+] and to the top
of the form by [-] in
1/144 in increments.
-20 – -1
0
+20 – +1
TOF
(continuous)
Select the reference
position for the TOF
position when auto
loading continuous
form paper from the
rear of the printer.
(Up to the mid-
section of characters
in the first line.)
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm(11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
Use top of form
MENU ITEM FUNCTION SETTING