Oki ML1120 Technical Reference Guide

Technical Reference Guide – Command descriptions > 93
Right margin is set at (n) characters from head home
position.
> Range:
Range n = 1 – 255
> Out of range:
The number “n” must be within the ranges given above,
otherwise it will be ignored.
If n = 0, or is less than or equal to the left margin, this
command is ignored.
> Additional details:
The right margin is set as an absolute position, according
to the current character pitch. Changes in character pitch
do not change the margin setting.
While in proportional mode the character pitch width will
be set in pica character size. (ML1190 eco : 10 CPI = 36
dots, ML1120 eco : 10CPI = 12 dots)
Any graphics after the right margin are lost.
Setting the right margin clears the print buffer.
Minimum difference between left margin and right margin
values is 5 characters for 5 CPI.
Attempting to print a character beyond the right margin
will print the character on the next line after a line feed and
carriage return are executed.
NAME PITCH VALUE
ML1190 ECO ML1120 ECO
PICA/PROPORTIONAL 10 4 – 80 2 – 80
ELITE 12 5 – 96 3 – 96
– 15 6 – 120 3 – 120
COMPRESSED 17.1 7 – 137 4 – 138
COMPRESSED ELITE 20 8 – 160 4 – 160
COMPRESSED Prop 20 8 – 160 –

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \