Technical Reference Guide – Command descriptions > 95
ML1190 eco: EPSON LQ
ML1120 eco: EPS FX
> Function:
The text position/alignment will be set according to one of
the four given modes assigned by n. (n is a Binary value.)
> Range:
> Additional details:
n = 0: Left justification is the default or standard format,
in which the left margin is justified and the right margin is
not.
n = 1: The centring command centres a line of text
between the margins. This command is used for headings,
titles and captions.
n = 2: Right justification is the opposite of left justification.
The right margin is justified and the left is not.
n =3: Full justification puts extra spaces where necessary
so that both the left and right margins are justified.
Full justification (n = 3) is performed when data exceeding
75% of printable characters in a line is received at the time
of print start.
BS, DEL, HT are invalid when auto justification is used
except when n = 0.
N JUSTIFICATION
00H Left
01H Centre
02H Right
03H Full
To Next Page
Loading...
