APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-79
Page
2-2-8 Image acquisition to prevent crosstalk between fluorescence (Sequential Scan)
An image which is suppressed crosstalk can be acquired sequentially by combination of
excitation laser and those image acquisition channel.
With this image capturing method, the image of a multiple-dyed specimen can be obtained
by sequentially acquiring image slice of each type of fluorescence.
1. Select the [Surface XY-Note] option button in the [Mode] group box in the [Acquire]
panel, then select <Sequen> in the list shown below.
Selecting <Sq Clp>, <Sq Rct>, or <Line Sq> enables the image acquisition of the
desired rectangle area or that of the rectangle area at desired angle, or a line
sequential scan..
Line Sequential Scan
Ordinary sequential scan is performed for every one frame for every group,
whereas line sequential scan is performed for every one line for every group.
Therefore, line sequential scan is of advantage in minimizing the time lag
between wavelength and acquiring a fewer cross-talk image.
2. Select the observation mode with the option buttons in the [Acquire] panel.
To Next Page
Loading...
Need help?
General
