Olympus Fluoview FV1000 - Displaying Different Images Together; Re-Arranging Images Using the same Display Method

APPLIED OPERATIONS/Changing the Image Display Method
OPERATION INSTRUCTIONS
2-220
Page
2-5-7-6 Re-arranging Images Using the Same Display Method
All of the images displayed together in a image window can be rearranged simultaneously
based on the same display method (channels, magnification, scroller position).
1. Click one of the images displayed together.
Two sets of buttons appear above and below the clicked image.
2. Change the image display method using the displayed buttons.
3. Click the <Retile> or <New Page> button. All of the images in the panel are re-
displayed using the same display method as that set in step 2 above.
2-5-7-7 Displaying Different Images Together
Two completely different images can be displayed together.
The two images to be displayed together should be acquired by observation or loaded by
opening a file. If two images are not available, prepare them by image acquisition or file
opening.
1. Display the image window of either image to be displayed with another image.
The icon of the image is displayed in the frame at the top left of the [Tile] panel and the
acquisition parameters used in image acquisition are displayed in the [Experiment]
panel.