Olympus Fluoview FV1000 - Configuring the Filters (When Using a Filter System)

Getting Started FLUOVIEW/Online Help
OPERATION INSTRUCTIONS
1-52
Page
1-3-2-3 Configuring the Filters (When using a filter system)
The barrier filters, excitation filter and beam splitter are set automatically to the light path
according to the dyeing method selected for the specimen.
Use the following procedure to change these filters.
1. Select the [Settings] sub-panel.
Fig. 1-16 [Settings] Sub-panel
<Scan Unit> button
Display the filter and lase
r
types to be set.
(Combination with the lase
r
combiner sets up the lase
r
automatically.)