Olympus Fluoview FV1000 - Appendix A List of Hot Keys

Appendix A List of Hot Keys
OPERATION INSTRUCTIONS
A
-1
Page
Appendix A List of Hot Keys
Frequently-used FLUOVIEW functions (scanning, panel switching) can be controlled from the keyboard without
using the mouse.
z Image acquisition-related keys
Image acquisition channel selection
Key Target Operation
Ctrl + 1
Switches the status of the Ch1 check box (Ch1 scanned/not scanned).
Ctrl + 2
Switches the status of the Ch2 check box (Ch2 scanned/not scanned).
Ctrl + 3
Switches the status of the Ch3 check box (Ch3 scanned/not scanned).
Ctrl + 4
Switches the status of the Ch4 check box (Ch4 scanned/not scanned).
Ctrl + 5
Switches the status of the Ch5 check box (Ch5 scanned/not scanned).
PMT voltage/gain/offset adjustments
Key Target Operation
Shift + ←
Enables and makes variable the LED slider on the left.
Shift + ¤
Enables and makes variable the LED slider on the right.
Alt + ↓
Decreases the value of an enabled LED slider. (Fine adjustment)
Shift + ↓
Decreases the value of an enabled LED slider. (Coarse adjustment)
Alt + ↑
Increases the value of an enabled LED slider. (Fine adjustment)
Shift + ↑
Increases the value of an enabled LED slider. (Coarse adjustment)
An LED slider is enabled and variable when its setting values are displayed
in red.
NOTE